DubGrub Dual Motor Mount for Arrma 6s BLX Platform
Art.Nr.: dg-mm-pps
Hersteller: PPS RC
199,00 EUR
inkl. 19 % MwSt
-
Sofort versandfähig, ausreichende Stückzahl
- Lieferzeit 5-8 Tage**
- Gewicht 0,2 kg
Produktbeschreibung
DubGrub Dual Motor Mount for Arrma 6s BLX Platform (mount only)
When one motor isn't enough now you can mount two!
Based on the popular Grublock motor mount, this dual motor mount features screw adjustable fine-tunable gear mesh. It will mount either dual small or big can motors.
It will bolt into all Arrma 6s BLX cars that are V4 and newer, however extensive modification to the chassis layout is required. You will need to find new homes for the batteries. The onroad people can widen the chassis, however if you plan to install this in your Kraton/Mojave/etc... you will need to get extra creative. Long story short, the mount will bolt in, and motors will bolt to it, but everything else is up to you.
The DubGrub Mount will include ALL NEW hardware, as well as the tools for the adjuster. You will need to drill an extra hole for the mount in your chassis, however a screw location template is built into the box.
Motor Mount Combos are also available. They include the Dubgrub Motor Mount, Differential Brace, and Differential cap.
*** 8mm shaft motors will need to have a 30mm long shaft, and the pinion will need to be mounted flipped. This is a very common and standard thing, however there are some oddball motors out there with 8mm thick 20mm long motor shafts. Basically if the shaft is longer than your stock motor, you should be all set. And MOST of them are.
When one motor isn't enough now you can mount two!
Based on the popular Grublock motor mount, this dual motor mount features screw adjustable fine-tunable gear mesh. It will mount either dual small or big can motors.
It will bolt into all Arrma 6s BLX cars that are V4 and newer, however extensive modification to the chassis layout is required. You will need to find new homes for the batteries. The onroad people can widen the chassis, however if you plan to install this in your Kraton/Mojave/etc... you will need to get extra creative. Long story short, the mount will bolt in, and motors will bolt to it, but everything else is up to you.
The DubGrub Mount will include ALL NEW hardware, as well as the tools for the adjuster. You will need to drill an extra hole for the mount in your chassis, however a screw location template is built into the box.
Motor Mount Combos are also available. They include the Dubgrub Motor Mount, Differential Brace, and Differential cap.
*** 8mm shaft motors will need to have a 30mm long shaft, and the pinion will need to be mounted flipped. This is a very common and standard thing, however there are some oddball motors out there with 8mm thick 20mm long motor shafts. Basically if the shaft is longer than your stock motor, you should be all set. And MOST of them are.
Bewertungen
* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr
