M2c 1100 X SERIES MOTOR MOUNT AND SLIDE
Art.Nr.: M2c-1100
Hersteller: M2C Racing
103,00 EUR
inkl. 19 % MwSt
-
Sofort versandfähig, ausreichende Stückzahl
- Lieferzeit 1-2 Tage**
- Lagerbestand 1
- Gewicht 0,3 kg
Produktbeschreibung
M2c 1100 TRAXXAS XMAXX SERIES MOTOR MOUNT AND SLIDE
Brand: M2C Racing
8/8/23 YOU CAN NOW USE THIS MOUNT WITH YOUR STOCK MOTOR WITH THE M2C 1151 END BELL.
The new M2C RACING X SERIES is here! Built to fit X SERIES TRUCKS.
Our newest addition to the M2C family is the M2C 1100 SLIDING MOTOR MOUNT SYSTEM.
THIS MOUNT CAN BE USED ALONE, BUT THE 1114 ESC MOUNT AND BRACE IS RECOMMENDED FOR MAXIMUM PERFORMANCE.
This system has been tested and developed to be the absolute best motor mount available for the X SERIES TRUCKS.
Does not work with stock motor.
Fits hobbywing 1650kv, 1100kv, and 800kv combos and many others!
We have found that some 800kv combos require the ESC to be moved back past the holes.
In this case position as needed and use double sided tape and a zip tie.
The new M2C RACING X SERIES is here! Built to fit X SERIES TRUCKS.
Our newest addition to the M2C family is the M2C 1100 SLIDING MOTOR MOUNT SYSTEM.
Gone are the days of fighting for proper mesh adjustment then only to strip a spur gear due to chassis flex.
The M2C 1100 is a one piece design made from 6061 T6 aircraft grade aluminum.
Combined with the M2C 1101 MOTOR SLIDE you can now set your mesh perfectly and even swap out motors on the fly.
The M2C 1101 is designed to fit 25MM and 30MM hole patterns, we recommend using both. For a 4 bolt attachment!
The M2C 1101 is made from 7075 T6 aircraft grade aluminum.
We have also addressed the the chassis flex issue with our new M2C 1114 CHASSIS CAGE BRACE / ESC MOUNT.
The M2C 1114 bolts to the top of the M2C 1100 creating a rigid structure from the base of the truck to the top of the mount.
The M2C 1114 also incorporates a mounting plate for most of the popular ESC's on the market.
This is an engineered system designed and built to work together right here in the USA.
The M2C 1100 is a one piece design made from 6061 T6 aircraft grade aluminum.
This system has been tested and developed to be the absolute best motor mount available for the X SERIES TRUCKS.
some MOD 1 gear ratios we've found are as follows
1100kv motor
54/24 middle position
54/23 moved closer
50/27 middle
50/26 moved closer
46/28 middle
HW 1100kv & 50t spur with 30t pinion will be the smallest usable gear.
Some gear MOD 1.5 ratios we've found are as follows
35/30
30/25
30/30
**********PLEASE SEE LAST PHOTO. MATERIALS DONT ALWAYS COME IN PERFECT. WE SQUARE UP THE MATERIAL TO MAKE SURE EACH PART IS PERPENDICULAR TO THE BASE TO LINE UP THE GEARS PROPERLY. THIS SOMETIMES RESULTS IN THE CONDITION SHOWN HERE**************
Brand: M2C Racing
8/8/23 YOU CAN NOW USE THIS MOUNT WITH YOUR STOCK MOTOR WITH THE M2C 1151 END BELL.
The new M2C RACING X SERIES is here! Built to fit X SERIES TRUCKS.
Our newest addition to the M2C family is the M2C 1100 SLIDING MOTOR MOUNT SYSTEM.
THIS MOUNT CAN BE USED ALONE, BUT THE 1114 ESC MOUNT AND BRACE IS RECOMMENDED FOR MAXIMUM PERFORMANCE.
This system has been tested and developed to be the absolute best motor mount available for the X SERIES TRUCKS.
Does not work with stock motor.
Fits hobbywing 1650kv, 1100kv, and 800kv combos and many others!
We have found that some 800kv combos require the ESC to be moved back past the holes.
In this case position as needed and use double sided tape and a zip tie.
The new M2C RACING X SERIES is here! Built to fit X SERIES TRUCKS.
Our newest addition to the M2C family is the M2C 1100 SLIDING MOTOR MOUNT SYSTEM.
Gone are the days of fighting for proper mesh adjustment then only to strip a spur gear due to chassis flex.
The M2C 1100 is a one piece design made from 6061 T6 aircraft grade aluminum.
Combined with the M2C 1101 MOTOR SLIDE you can now set your mesh perfectly and even swap out motors on the fly.
The M2C 1101 is designed to fit 25MM and 30MM hole patterns, we recommend using both. For a 4 bolt attachment!
The M2C 1101 is made from 7075 T6 aircraft grade aluminum.
We have also addressed the the chassis flex issue with our new M2C 1114 CHASSIS CAGE BRACE / ESC MOUNT.
The M2C 1114 bolts to the top of the M2C 1100 creating a rigid structure from the base of the truck to the top of the mount.
The M2C 1114 also incorporates a mounting plate for most of the popular ESC's on the market.
This is an engineered system designed and built to work together right here in the USA.
The M2C 1100 is a one piece design made from 6061 T6 aircraft grade aluminum.
This system has been tested and developed to be the absolute best motor mount available for the X SERIES TRUCKS.
some MOD 1 gear ratios we've found are as follows
1100kv motor
54/24 middle position
54/23 moved closer
50/27 middle
50/26 moved closer
46/28 middle
HW 1100kv & 50t spur with 30t pinion will be the smallest usable gear.
Some gear MOD 1.5 ratios we've found are as follows
35/30
30/25
30/30
**********PLEASE SEE LAST PHOTO. MATERIALS DONT ALWAYS COME IN PERFECT. WE SQUARE UP THE MATERIAL TO MAKE SURE EACH PART IS PERPENDICULAR TO THE BASE TO LINE UP THE GEARS PROPERLY. THIS SOMETIMES RESULTS IN THE CONDITION SHOWN HERE**************
Bewertungen
* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr
