M2C 1151 X SERIES 7075 STOCK MOTOR END BELL
Art.Nr.: M2c-1151
Hersteller: M2C Racing
41,00 EUR
inkl. 19 % MwSt
-
Sofort versandfähig, ausreichende Stückzahl
- Lieferzeit 5-8 Tage**
- Gewicht 0,1 kg
Produktbeschreibung
M2C 1151 TRAXXAS X MAXX SERIES 7075 STOCK MOTOR END BELL
Brand: M2C Racing
The new M2C RACING X SERIES 1151 STOCK MOTOR END BELL is here.
Made from 7075-T6 aluminum, and built to fit the STOCK MOTOR that comes in X and XR SERIES TRUCKS.
We have had many requests to use our M2C 1118 MOTOR MOUNT SYSTEM with the stock motor, so here ya go!
We were able to buy a machine with the capability to make these, so we jumped on it.
These are good motors, why not get the most use possible out of them?
You can now use your stock motor with ANY 25MM bolt pattern motor mount, even on other cars (stock mounting hole locations also included).
The M2C TEST TEAM really loves this motor in 1/7 and 1/8 scale ARRMA cars.
Includes the following:
1) M2C 1153 X SERIES 7075 STOCK MOTOR END BELL
2) M4 x 12 button head screws ( correct for M2C X SERIES motor slides, you may need different screws for different applications BE CAREFUL!)
1) M4 x 5 set screw (to put in stock hole location to keep dirt out)
********NOTE****** We bored the hole .5MM shallow on purpose for extra clearance to the windings. Your bearing should stick out a tiny amount.
There is a counterbore to help you get the bearing in strait.
We recommend a drop of loctite on the outside of the bearing. We made this a slip fit to account for bearing tolerances.
Brand: M2C Racing
The new M2C RACING X SERIES 1151 STOCK MOTOR END BELL is here.
Made from 7075-T6 aluminum, and built to fit the STOCK MOTOR that comes in X and XR SERIES TRUCKS.
We have had many requests to use our M2C 1118 MOTOR MOUNT SYSTEM with the stock motor, so here ya go!
We were able to buy a machine with the capability to make these, so we jumped on it.
These are good motors, why not get the most use possible out of them?
You can now use your stock motor with ANY 25MM bolt pattern motor mount, even on other cars (stock mounting hole locations also included).
The M2C TEST TEAM really loves this motor in 1/7 and 1/8 scale ARRMA cars.
Includes the following:
1) M2C 1153 X SERIES 7075 STOCK MOTOR END BELL
2) M4 x 12 button head screws ( correct for M2C X SERIES motor slides, you may need different screws for different applications BE CAREFUL!)
1) M4 x 5 set screw (to put in stock hole location to keep dirt out)
********NOTE****** We bored the hole .5MM shallow on purpose for extra clearance to the windings. Your bearing should stick out a tiny amount.
There is a counterbore to help you get the bearing in strait.
We recommend a drop of loctite on the outside of the bearing. We made this a slip fit to account for bearing tolerances.
Bewertungen
* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr
