M2C GEN 2 ARRMA 8S STEERING BELL CRANK UPGRADE KIT
Art.Nr.: M2c-3634
Hersteller: M2C Racing
49,00 EUR
inkl. 19 % MwSt
-
Sofort versandfähig, ausreichende Stückzahl
- Lieferzeit 1-2 Tage**
- Lagerbestand 1
- Gewicht 0,2 kg
Produktbeschreibung
M2C 3634 GEN 2 ARRMA 8S STEERING BELL CRANK UPGRADE KIT FOR 56118 MOTORS with M2C BELLCRANK KIT
Brand: M2C Racing
NOW CLEARS THE MAX5 G2 COMBO WITH 56118 MOTOR
The upgrade kit if for current M2C 3295 steering kit owners. It only contains the drag link and passenger arm, all you need.
You will need to install the included flat nut with loctite and grind some clearance as shown. (also shown is why)
You'll also need to reset your steering endpoints, you actually gain a little max steering to the left with the new geometry.
TOUGH TESTED by the M2C TEST TEAM. This kit has been beat to death with no failures so far.
All parts are made using 7075-t6 Aircraft aluminum. These are high precision machined bearing POCKETS.
Please be patient when inserting bearings.
The best method is to insert the bottom bearing on the shoulder bolt into the pocket. then put the top bearing on the post and let the shoulder bolt align the bearing.
It is advised that you blue lock tight on the shoulder bolts threads when installing the parts.
This model does not use bushings. The 6mm reamed hole will give you full support of the steering arms.
It is also advised that you grease the posts to cut down on friction.
48 grams
Brand: M2C Racing
NOW CLEARS THE MAX5 G2 COMBO WITH 56118 MOTOR
The upgrade kit if for current M2C 3295 steering kit owners. It only contains the drag link and passenger arm, all you need.
You will need to install the included flat nut with loctite and grind some clearance as shown. (also shown is why)
You'll also need to reset your steering endpoints, you actually gain a little max steering to the left with the new geometry.
TOUGH TESTED by the M2C TEST TEAM. This kit has been beat to death with no failures so far.
All parts are made using 7075-t6 Aircraft aluminum. These are high precision machined bearing POCKETS.
Please be patient when inserting bearings.
The best method is to insert the bottom bearing on the shoulder bolt into the pocket. then put the top bearing on the post and let the shoulder bolt align the bearing.
It is advised that you blue lock tight on the shoulder bolts threads when installing the parts.
This model does not use bushings. The 6mm reamed hole will give you full support of the steering arms.
It is also advised that you grease the posts to cut down on friction.
48 grams
Bewertungen
* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr
