M2C XR Series Mountzilla Motor Mount and Slide
Art.Nr.: M2C-1214
Hersteller: M2C Racing
149,00 EUR
inkl. 19 % MwSt
-
Sofort versandfähig, ausreichende Stückzahl
- Lieferzeit 5-8 Tage**
- Lagerbestand 1
- Gewicht 0,2 kg
Produktbeschreibung
M2C 1214 TRAXXAS XRT SERIES MOUNTZILLA MOTOR MOUNT AND SLIDE
Brand: M2C Racing
12/7/23 The new M2C RACING X SERIES PERFECT MESH SYSTEM IS HERE.
Built to fit XR SERIES TRUCKS!! NOW COMES STANDARD WITH M2C MOTOR MOUNTS.
SETTING YOUR MESH DOESN'T HAVE TO BE A CHORE ANYMORE WITH THE M2C PERFECT MESH SYSTEM.
Please see 1101-UP listing for written instructions:
8/8/23 YOU CAN NOW USE THIS MOUNT WITH YOUR STOCK MOTOR WITH THE M2C 1151 END BELL; you cannot use the stock fans)
The new M2C RACING XR SERIES is here! Built to fit XR SERIES TRUCKS!!
Our newest addition to the M2C family is the M2C 1214 XR SERIES MOUNTZILLA MOTOR MOUNT SYSTEM.
THIS MOUNT CAN BE USED ALONE, BUT THE M2C 1296 ESC MOUNT IS RECOMMENDED FOR MAXIMUM PERFORMANCE.
This system has been tested and developed to be the absolute best motor mount available for the XR SERIES TRUCKS.
Fits hobbywing 1650kv, 1100kv, and 800kv combos and many others.
Gone are the days of fighting for proper mesh adjustment then only to strip a spur gear due to chassis flex.
The M2C 1214 is a one piece design made from 6061 T6 aircraft grade aluminum.
Combined with the M2C 1101 MOTOR SLIDE you can now set your mesh perfectly and even swap out motors on the fly.
The M2C 1101 is designed to fit 25MM and 30MM hole patterns, we recommend using both. For a 4 bolt attachment.
The M2C 1101 is made from 7075 T6 aircraft grade aluminum.
The M2C 1296 ESC MOUNT is drilled for MAX5 , MAX 6, AND CASTLE XLX2
This is an engineered system designed and built to work together right here in the USA.
This system has been tested and developed to be the absolute best motor mount available for the XR SERIES TRUCKS!
********** WE RECOMMEND NO LONGER THAN 92MM CAN WITHOUT M2C 1292 REAR SUPPORT ************
Here are some gearing examples with an 1100kv motor
54/24 middle position
54/23 moved closer
50/27 middle
50/26 moved closer
46/28 middle
HW 1100kv & 50t spur with 30t pinion will be the smallest usable gear.
Some gear MOD 1.5 ratios we've found are as follows
35/30
30/25
30/30
**********PLEASE SEE LAST PHOTO. MATERIALS DONT ALWAYS COME IN PERFECT. WE SQUARE UP THE MATERIAL TO MAKE SURE EACH PART IS PERPENDICULAR TO THE BASE TO LINE UP THE GEARS PROPERLY. THIS SOMETIMES RESULTS IN THE CONDITION SHOWN HERE***************
Brand: M2C Racing
12/7/23 The new M2C RACING X SERIES PERFECT MESH SYSTEM IS HERE.
Built to fit XR SERIES TRUCKS!! NOW COMES STANDARD WITH M2C MOTOR MOUNTS.
SETTING YOUR MESH DOESN'T HAVE TO BE A CHORE ANYMORE WITH THE M2C PERFECT MESH SYSTEM.
Please see 1101-UP listing for written instructions:
8/8/23 YOU CAN NOW USE THIS MOUNT WITH YOUR STOCK MOTOR WITH THE M2C 1151 END BELL; you cannot use the stock fans)
The new M2C RACING XR SERIES is here! Built to fit XR SERIES TRUCKS!!
Our newest addition to the M2C family is the M2C 1214 XR SERIES MOUNTZILLA MOTOR MOUNT SYSTEM.
THIS MOUNT CAN BE USED ALONE, BUT THE M2C 1296 ESC MOUNT IS RECOMMENDED FOR MAXIMUM PERFORMANCE.
This system has been tested and developed to be the absolute best motor mount available for the XR SERIES TRUCKS.
Fits hobbywing 1650kv, 1100kv, and 800kv combos and many others.
Gone are the days of fighting for proper mesh adjustment then only to strip a spur gear due to chassis flex.
The M2C 1214 is a one piece design made from 6061 T6 aircraft grade aluminum.
Combined with the M2C 1101 MOTOR SLIDE you can now set your mesh perfectly and even swap out motors on the fly.
The M2C 1101 is designed to fit 25MM and 30MM hole patterns, we recommend using both. For a 4 bolt attachment.
The M2C 1101 is made from 7075 T6 aircraft grade aluminum.
The M2C 1296 ESC MOUNT is drilled for MAX5 , MAX 6, AND CASTLE XLX2
This is an engineered system designed and built to work together right here in the USA.
This system has been tested and developed to be the absolute best motor mount available for the XR SERIES TRUCKS!
********** WE RECOMMEND NO LONGER THAN 92MM CAN WITHOUT M2C 1292 REAR SUPPORT ************
Here are some gearing examples with an 1100kv motor
54/24 middle position
54/23 moved closer
50/27 middle
50/26 moved closer
46/28 middle
HW 1100kv & 50t spur with 30t pinion will be the smallest usable gear.
Some gear MOD 1.5 ratios we've found are as follows
35/30
30/25
30/30
**********PLEASE SEE LAST PHOTO. MATERIALS DONT ALWAYS COME IN PERFECT. WE SQUARE UP THE MATERIAL TO MAKE SURE EACH PART IS PERPENDICULAR TO THE BASE TO LINE UP THE GEARS PROPERLY. THIS SOMETIMES RESULTS IN THE CONDITION SHOWN HERE***************
Bewertungen
* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr
