M2c 1118 X SERIES MOTOR MOUNT SYSTEM
Art.Nr.: M2c-1118
Hersteller: M2C Racing
169,00 EUR
inkl. 19 % MwSt
-
Sofort versandfähig, ausreichende Stückzahl
- Lieferzeit 5-8 Tage**
- Gewicht 0,4 kg
Produktbeschreibung
Brand: M2C Racing
8/8/23 YOU CAN NOW USE THIS MOUNT WITH YOUR STOCK MOTOR WITH THE M2C 1151 END BELL.
7/21/23 UPDATE - NOW FITS THE MAX5 G2 COMBO.
YOU MUST USE OUR REAR SUPPORT, OR SOMETHING, UNDER THE BACK OF THIS MONSTER MOTOR.
Note*** The MAX5 G2 esc holes are only 8MM deep, you must use the 3 included 8MM screws with this unit.
The new M2C RACING X SERIES is here! Built to fit X SERIES TRUCKS.
Our newest addition to the M2C family is the M2C 1118 SLIDING MOTOR MOUNT SYSTEM.
This system has been tested and developed to be the absolute best motor mount available for the X SERIES TRUCKS.
Fits hobbywing 1650kv, 1100kv, and 800kv combos and many others.
(We do not recommend the 800kv, its just too much power in this light truck. But it fits)
The 4 button head screws included are for the motor slide.
The 2 smaller cap screws are for securing the top of the motor mount to the esc plate.
Re-use your stock screws for mounting.
Gone are the days of fighting for proper mesh adjustment then only to strip a spur gear due to chassis flex.
The M2C 1100 is a one piece design made from 6061 T6 aircraft grade aluminum.
Combined with the M2C 1101 MOTOR SLIDE you can now set your mesh perfectly and even swap out motors on the fly.
The M2C 1101 is designed to fit 25MM and 30MM hole patterns, we recommend using both. For a 4 bolt attachment.
We have also addressed the the chassis flex issue with our new M2C 1114 CHASSIS CAGE BRACE / ESC MOUNT.
The M2C 1114 bolts to the top of the M2C 1100 creating a rigid structure from the base of the truck to the top of the mount.
The M2C 1114 also incorporates a mounting plate for most of the popular ESC's on the market.
This is an engineered system designed and built to work together right here in the USA.
The M2C 1100 is a one piece design made from 6061 T6 aircraft grade aluminum.
This system has been tested and developed to be the absolute best motor mount available for the X SERIES TRUCKS.
Does not work with stock motor.
some MOD 1 gear ratios we've found are as follows
1100kv motor
54/24 middle position
54/23 moved closer
50/27 middle
50/26 moved closer
46/28 middle
HW 1100kv & 50t spur with 30t pinion will be the smallest usable gear.
We have found that even the castle 1100kv / xlx2 combo can fit if you flip our brace upside down! check out the pic, its HUGE!
Some gear MOD 1.5 ratios we've found are as follows
35/30
30/25
30/30
**********PLEASE SEE LAST PHOTO. MATERIALS DONT ALWAYS COME IN PERFECT. WE SQUARE UP THE MATERIAL TO MAKE SURE EACH PART IS PERPENDICULAR TO THE BASE TO LINE UP THE GEARS PROPERLY. THIS SOMETIMES RESULTS IN THE CONDITION SHOWN HERE***************
Empfohlenes Zubehör
Bewertungen
